Menu System - Danfoss EFIT 850 Installation And User Manual

User Manual
Combined view (default):
The combined view shows the status of both systems at
the same time . System A is shown on the upper display
line, and System B is shown on the lower display line .
This view gives the user a quick overview of all the sys-
tems .
Flipped view:
The flipped view shows the status of 1 system at a time .
The status of each system is shown for 5 seconds .
This view gives the user more detailed information about
each system .
The user can always press
irrespective of view selected .

Menu system

The menu system is navigated by the keys
No matter if the EFIT™ 850 controls one
or two systems, the look and use of the
menu system is always the same . This is
obtained by making the entry to each
system in the main menu . The possibili-
ties and settings for each system are first
accessible after the user has selected the
desired system .
To the right is given an example of the
main menu and the menus for System A
and System B .
Please notice, that only a few of the
menus for each system are shown!
For a complete overview of the menu system, please refer to: Appendix A: "Menu
system" .
6
to get more information about the current status
and
A:Roof ˜
B:Ground ¯ˆı
A:Roof ˜
ÚStandby
Select system A:
Roof
Select system B:
Ground
View alarm
menu
A:Roof ˜
B:Ground ¯ˆı
A:Roof ˜
B:Ground ¯ˆı
A:Roof ˜
ÚStandby
Select system A :
Roof
Select system B :
Ground
A:Roof
B:Ground
A:Roof
Standby
> >
B:Ground
Melting
> >
.
5s
B:Ground ¯ˆı
5s
ÚMelting
View and set
operating mode
View sensor
measurements
View and set
operating mode
View sensor
measurements
O nly vis ible when S ys tem B is ins talled !
5s
B:Ground ¯ˆı
5s ÚMelting
S ys tem menu
(S ys tem A )
S ys tem menu
(S ys tem B )
Only vis ible when

 

 
S ys tem
A
S ys tem
B