Table of Contents
Advertisement
Installer Manual
Installation of roof system
The installation of a EFIT™ 850 with 1 roof system has been selected .
It is optional if the sensors are connected to the EFIT™ 850 before power on or during
the installation .
The system uses the output System A.
If sensors for System A are not connected - do it now!
Press
or wait...
System is being scanned to find type of connected
sensors...
Select system type: Roof
Wait until correct number of sensors for System A
is found .
Press
when all sensors are found...
System A is installed...
System is being checked...
to configure System A.
Press
(Naming sensors and changing factory settings)
Please refer to "Changing parameters and performance
of systems" in "User Manual" for description of the con-
figurable parameters .
If for some reason you do not wish to configure the system now you can press
skip configuration of system .
Press
to end configuration .
16
Connect sensors
System A
System A
Scanning...
System type:
Roof
1 Roof sensor
found. Accept?
System A!
Installed
Checking system
<------>
Config system:
System A
Press Û to end
configuration.
:
to
Advertisement
Table of Contents
