Table of Contents
Advertisement
3.2.2
Mounting the control element
Multiplex Trio E fitting, electronic mixing unit
DANGER! This step must only be done by a qualified electrician!
Connect to the mains.
Mounting of the control element is shown here at the bathtub rim by
way of example. For mounting it at another surface, e.g. in the pre-wall,
the same steps and preconditions apply.
Requirements:
The planned mounting site of the control elements can be reached
n
from the mounting site of the mixing unit with a cable of 3 m length
(6 m with extension).
At the mounting site, there is a drill hole with a diameter of
n
38–40 mm.
Behind the drill hole, there is a clearance of at least 40 mm.
n
Guide the connection cable of the control element through the drill
hole.
Insert the control element in the drill hole.
Handling
23 from 38
Advertisement
Table of Contents
