Table of Contents
Advertisement
Setting the water stream strength
3.3.3
Disabling the temperature safeguard
Multiplex Trio E fitting, electronic mixing unit
Operating status
„ON"
Action
Turn the control element without pressing it.
Turning clockwise: LED amber = warmer;
turning anti-clockwise: LED blue = colder
Result
You have changed the water temperature.
Operating status
„ON"
Action
Keep the control element pressed and turn it.
Turning clockwise = water stream stronger;
turning anti-clockwise = weaker
Result
You have changed the strength of the water
stream.
WARNING!
Risk of scalding from hot water
At water temperatures of 40 °C and up, there is the risk of
scalding, in particular for children. At significantly higher
temperatures, severe injuries from scalding may occur. To
prevent injuries from scalding, the mixing unit comes with a
temperature safeguard permanently pre-set at 38 °C.
Comply with the following measures to prevent scalding:
– After disabling the temperature safeguard, proceed with
particular caution when increasing the temperature.
– Only disable the temperature safeguard if a direct con‐
tact with the water at the water outlet is excluded, and if
there are no small children or handicapped persons in
the bathtub.
– Children must always be supervised in the bathtub so
that they cannot accidentally disable the temperature
safeguard.
Handling
27 from 38
Advertisement
Table of Contents
