Transport And Storage; Delivery; Intermediate Storage; Unpacking - Grundfos DMX 4-10 Installation And Operating Instructions Manual

Table of Contents

Advertisement

7. Transport and storage

Do not throw or drop the pump.
Store the pump in a dry and cool place.
Store the pump in upright position so that the
Caution
gear grease cannot leak out.
Do not use the protective packaging as transport
packaging.
Observe the permissible storage temperature!

7.1 Delivery

The DMX 221 dosing pumps are supplied in different packaging,
depending on pump type and the overall delivery. For transport
and intermediate storage, use the correct packaging to protect
the pump against damage.

7.2 Intermediate storage

Permissible storage temperature: –20 °C to +50 °C.
Permissible air humidity: max. relative humidity: 92 %
(non-condensing).

7.3 Unpacking

Retain the packaging for future storage or return, or dispose of
the packaging in accordance with local regulations.

7.4 Return

Return the pump in its original packaging or equivalent.
The pump must be thoroughly cleaned before it is returned or
stored. It is essential that there are no traces of toxic or
hazardous media remaining on the pump.
Grundfos Alldos accepts no liability for damage
caused by incorrect transportation or missing or
Caution
unsuitable packaging of the pump!
Before returning the pump to Grundfos Alldos for service, the
safety declaration at the end of these instructions must be filled
in by authorised personnel and attached to the pump in a visible
position.
If a pump has been used for a medium which is
injurious to health or toxic, the pump will be
Caution
classified as contaminated.
If Grundfos Alldos is requested to service the pump, it must be
ensured that the pump is free from substances that can be
injurious to health or toxic. If the pump has been used for such
substances, the pump must be cleaned before it is returned.
If proper cleaning is not possible, all relevant information about
the chemical must be provided.
If the above is not fulfilled, Grundfos Alldos can refuse to accept
the pump for service. Costs of returning the pump are paid by the
customer.
The safety declaration can be found at the end of these instructions.
The replacement of the supply cable must be
carried out by an authorised Grundfos Alldos
Caution
service workshop.
13

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents