Settings In Bios Setup Utility; Starting The Bios Setup Utility - Fujitsu ESPRIMO K55x/24 Series Operating Manual

Settings in BIOS Setup Utility

Hardwareconfiguration System configuration Setup Configuration,BIOSSetupUtility System settings,BIOSSetupUtility BIOS SetupUtility
The BIOS Setup Utility allows you to set the system functions and the
hardware configuration for your device.
When it is supplied, the device is set to factory default settings. You can change
these settings in the BIOS Setup Utility menu. Any changes you make take effect
as soon as you save and exit the BIOS Setup Utility.
The BIOS Setup Utility program contains the following menus:
Menu
Main
Advanced
Security
Power
Event Logs
Boot
Save & Exit
The following function keys can also be used:
Key
Esc
F2
F3
F4

Starting the BIOS Setup Utility

► Start the device (switch off/on or reboot the Operating System).
BIOSSetupUtility

Depending on the setting for Fast Boot in the BIOS Setup Utility the following display,
if applicable, appears on the screen on start-up:
<F2> BIOS Setup <F12> Boot Menu
► Press the function key
► If a password has been assigned, enter the password and press the Enter key.
If you have forgotten the password, contact your system administrator
or contact our customer service centre.
The BIOS Setup Utility starts.
Fujitsu
Description
System settings such as time and date
Advanced system settings
Password settings and security functions
Energy saving function
Protocol settings
Configuration of the start-up sequence
Exits the BIOS Setup Utility
Description
To exit the BIOS Setup Utility.
The current settings are not saved.
To reject changes and load the previous configuration of the BIOS Setup
Utility.
To load the default configuration of the BIOS Setup Utility.
To exit the BIOS Setup Utility.
The current settings are saved.
F2 .
Operation
37