Fitting The Device To The Vesa Interface On A Monitor (Optional) - Fujitsu ESPRIMO Q55x Operating Manual

Fitting the device to the VESA interface on a monitor (optional)

With ESPRIMO Q95x type devices, the casing cover is already fitted with
the corresponding screw holes as standard.
With ESPRIMO Q55x type devices, you can order the corresponding casing
cover with screw holes separately if necessary.
The device must be fitted onto the screen in such a way that the connecting
and operating elements can be used from the side.
Remove the lower cover
• Requirement: The casing is open and the casing cover is removed (see
"Removing the bottom casing cover", Page
► Release the locking lugs (1) on the underside cover from the casing cover
and remove the underside cover (2).
You will find information on securing the lower cover in section
underside cover (device dependent)", Page
Fujitsu
87).
1
1
2
18.
Getting started
"Fitting the
25