Measuring Mode; Punctual Measurement - TESTO 400 Instruction Manual

If a probe's individual readings are hidden, these settings are stored on the testo
400 specifically for each probe and applied to all application menus. Whereas
the units set are only stored in the corresponding application menu, but are
time-independent.
The measuring mode can be set via the configuration menu
selection via Apply configuration
You can choose between the individual application menus:
Application menus
Basic view
Volume flow measurements
Comfort level – PMV/PPD
Discomfort level measurements
Differential temperature
Differential pressure

9.3.2 Measuring mode

9.3.2.1 Punctual measurement

In the first line of the configuration menu, you can choose between
Continuous
and (1). The text under
your selection (2). Click on
(see Section 9.3.2).
Continuous
X
X
X
X
X
X
Measuring Mode
Apply Configuration
9 Operation
. Confirm the
Punctual IAQ data
logger
X
X
X
X
X
Punctual
changes depending on
(3) to start the measurement.
X
X
X
27