Basic View; Graphic View - TESTO 400 Instruction Manual

9 Operation

Basic view

9.4.1
In the Basic view
recorded and saved. The Basic view is particularly suitable for fast,
uncomplicated measurements without the specific requirements of a standard-
compliant measurement. The measuring mode can be selected via the
Configuration menu
All probes that can be connected to the testo 400 are also displayed in the
Basic view
application menu. As this is not an application menu where only
specific probes can be used, all probes are highlighted in orange on the left-
hand side.
In all application menus, apart from the volume flow measurement, there are
three different screens for the measurement - Live (or also Basic view), Graphic
and Table.

Graphic view

9.4.1.1
In the Graphic view, the values for a maximum 4 channels can be displayed
simultaneously in a chronological trend graph. All measured parameters can be
displayed in the Graphic view via the channel selection (click on one of the four
selection fields). Once a measurement parameter has been selected, the value
is updated automatically.
The Zoom touch function allows individual parts of the graphic to be viewed in
more detail or time progressions to be displayed compactly.
1
Open the main
menu
2 Change of display
3 Reading for selected
channel
4 Measurement
parameter and
measurement unit
5 Graphic with selected
channels and 4 Y-axes
6 Status bar
7
Open the
configuration menu
8 Selection of other
channels
9 Time axis
10 New / Start / Stop /
Save button
32
application menu, the current measuring values can be read,
(see Section 9.4.2).