Iaq Data Logger Rear View; Mains Unit Cable - TESTO 400 Instruction Manual

14.2 IAQ data logger rear view

Element
1 USB connection cable for
connecting to the testo 400
3 Cable storage

14.3 Mains unit cable

The IAQ data logger is supplied with a USB mains unit. No recording of
measurement data occurs without power supply via the mains unit cable. The
Testo USB mains unit has the specification 5V / 2A.
Power supply via a mains unit cable!
Tripping hazard!
- Take care when routing the mains unit cable.
- Remove any trailing mains unit cable.
Do not use any other mains unit cable for the IAQ data logger. It may
only be used with the supplied original mains unit or a comparable 5V /
2A USB mains unit, since the charging electronics in the battery and the
mains unit are coordinated with each other.
Element
2 Bracket for measuring stand
CAUTION
14 IAQ data logger
125