Damping - TESTO 400 Instruction Manual

Damping

9.7.5
If the readings fluctuate wildly, it is advisable to damp the readings.
The probe is connected to the testo 400.

1
Click on

Main menu opens.
2
Click on Sensors.

The Sensors menu opens.
3
Click on the required sensor.

Information is displayed about the model, order number, serial number
and firmware version.
4
Click on the

Window with measurement parameters opens.
5 Activate damping
Enable
6 Click on Average of the measured

Window for Average of the measured values opens.
7 Enter a value between 2 and 20 seconds.
.
Measurement parameters
using the slider.
tab.
values.
9 Operation
85