Installation Of Lens Mount Base Assembly And Adjustment Of Flangeback - FujiFilm Fujica AX-1 Repair Manual And Part List

REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA AX -1
8.

Installation of lens mount base assembly and adjustment of flangeback

a. Install the lens mount base assembly on the camera body carefully so that lead
wire is not held between them.
b. Adjust flangeback to 43.45
NOTE: When the actual flangeback exceeds the limit, properly cut the camera
body and lens mount installation surface with a file.
c. Check the release lever (5 - 99) for its installing position, and install the release
lever.
mm by selecting a proper washer (3 - 60).
- 6 8 -