Table of Contents
Advertisement
REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA AX -1
6 - 4
Installing mount ring (8 - 40)
a.
Carefully combine the aperture transmission ring (3 - 43) with the leaf
spring (8 - 44) and claw ring (3 - 46), and Install the mount ring (8 - 46)
on the lens mount base with four screws (8 - 47).
b. Make sure that the claw ring (8 - 46) is not riding on the lent mount base
(8-84). If this claw ring is on the lens mount base, focusing will not be
made in the viewfinder or correct flangeback cannot be obtained.
c.
Make sure that the aperture transmission ring (8 - 48) moves snoothly.
d.
Apply Helicolube - Molycote mixed grease to the contact surfaces of the
claw ring (8-46) and leaf ipring (8-44) slightly.
e.
Apply Losold grease to the claw portions of the bayonet mount to improve
smoothness. In this case, apply Losoid grease to the flange surface of the
lens and claw portions, and wipe off the greats from the lens side after
lnstallng the lens on the camera.
- 6 2 -
Hide quick links:
Advertisement
Table of Contents
