Adjustment Of Mirror Angle (45") - FujiFilm Fujica AX-1 Repair Manual And Part List

REASSEMBLY, REPAIR AND ADJUSTMENT
FUJICA AX - 1
7. Adjustment of mirror angle (45°)
a. Adjust the base plate of a collmater (Gokosha Model 24LT - 2D) in parallel.
b. Set the lens mount base on the special tool (J10633).
c. Loosen the screw (4 - 24), and adjust the shaft holder (4 -149) to adjust parallelism
of the mirror,
d. Adjust 45° angle of the mirror with the screw (4 - 33).
e. When the adjustment is completed, retighten the screws (4 - 24 and 4 - 33) securely
and lock them with screw locking agent.
f. Adjust 45° angle of the mirror based on the installation hole of the lens mount.
- 6 6 -