FujiFilm Fujica AX-1 Repair Manual And Part List page 125

INSPECTION
FUJICA AX -1
INSPECTION POINT
4. Adaptability of Auto-
Winder
5. Appearance
6. Setting of parts after
completing inspection
METHOD OF INSPECTION
o Make sure that Fujica Auto - Winder X can be
installed correctly.
o Make sure that film is advanced one frame by
one frame with the Auto - Winder set to " S "
and that film is advanced sucessively with the
Auto-Winder set to "C".
o The camera should have neat appearance
having no scratch, damage, gap between fitted
parts, etc.
o All the parts should have been installed
securely and correctly.
o All the parts installed with adhesive should
not be peeled off or Boated, and adhesive
should have not come out from such parts.
o Lens:
o Shutter:
o Battery:
o Switch dial:
o Exposure counter:
- 1 2 2 -
inf.
To be released
Unloaded
OFF
S
REMARKS