Operating The Lavit Beverage Dispenser; Section 3: Operating The Lavit Dispenser - Lavit LB115 Service Manual

Section 3: Operating the Lavit Beverage Dispenser
Once the Lavit Beverage Dispenser is properly installed and all water streams have been
calibrated, operating the unit is done through the touchscreen and the Lavit Button to the right of
the touchscreen.
In normal operation the unit will display the HOME Screen
The HOME Screen has two large icons, one for Lavit Beverages and the second for preset volumes
of still and sparking water. The HOME screen may also have up to four icons displayed:
The FILTER icon is displayed if the Filter Timer in the Service Set Up Menu has
been set to ENABLE. If DISABLED this icon will not appear on the HOME screen
The Water Icon indicates if the dispenser's cold-water tank has enough
water available to dispense water or beverages. If RED, the tank should be
filling.
The CO
to craft a Lavit Sparkling Beverage. If RED, a cylinder change is required.
The Service Set Up icon allows the user to access the DATE/TIME screen and then
from that screen access the SERVICE MENU screen after entering a valid password.
gas icon indicates that the CO
2
cylinder has enough gas pressure available
2
29
TM170915-B