Co2 Cylinder Handling - Lavit LB115 Service Manual

CO Cylinder Handling
2
1. DO NOT expose filled Lavit CO
120°F (49°C) or below 34°F (1°C). If exposed to heat for a period of
time the safety pressure seal on the cylinder will burst and may
cause injury if the cylinder is in close proximity to the technician.
2. DO NOT wash the Lavit CO
rinse the bottle in hot water. DO NOT place the bottles in the
freezer. Doing so will compromise the integrity of the carbonating
bottle material and may result in serious personal injury.
3. DO NOT use any CO
the Lavit dispenser. Use only a LAVIT labeled cylinder provided by
an authorized Lavit Cylinder Distributor.
4. The Lavit CO
operating the Lavit dispenser.
5. The CO cylinder should be inspected prior to use for any dents,
2
punctures, or other damage. If any are detected, DO NOT use the
CO2 bottle and contact your cylinder provider.
6. Mishandling the Lavit CO
injury. Always keep CO
of direct sunlight. Do not store or leave filled cylinders in a service
van for long periods of time especially when experiencing warm
weather.
7. Do not transport the Lavit Dispenser with the CO
connected.
cylinders to temperatures above
2
bottles in the dishwasher and DO NOT
2
bottle not specifically designed to work with
2
cylinder should be properly installed prior to
2
cylinder can result in serious personal
2
bottle away from any heat source and out
2
9
cylinder
2
TM170915-B