Beverage Dispense Splatters/Multiple - Lavit LB115 Series Troubleshooting Manual

Beverage Dispense Splatters/Multiple Streams
Issue:
When crafting a Lavit beverage the dispense stream is broken up and several streams
may be present and the cup may overflow.
Solution:
This situation is usually the result of one of the conditions below.
1. Verify that the silicone nozzle inside the brewer is present and that itis
firmly attached to the water outlet fittings.
2. If water is also present in the capsule after the dispense cycle then
recalibrate the mix stream. Recalibrate other streams if
necessary.
3. Clean the chamber and verify the full rotation of the capsule lifting
mechanism. Remove the capsule tray. Pull the linkage attached to the top
of the chamber towards you. Reach down under the linkage and grasp the
capsule lifting mechanism (solid black plastic with a semi-circle cut out).
Rotate the mechanism forward to a full 90-degree position. Push
mechanism all the way back and repeat 3 times ensuring it moves freely.
4.
5
18-11-26-REV-A