Table of Contents
Advertisement
34
Notification Command Class:
The device uses Notification Command Class to report different
events to the controller ("Lifeline" group).
Protection CC:
Protection Command Class allows to prevent local (via inputs) or re-
mote control of the outputs.
* only Central Scene Notifications can be triggered in this state.
Z-Wave specIfIcatIon
Notification
Type
Power Manage-
Over-current detected
ment [0x08]
System hardware fail-
ure with manufactur-
System [0x09]
Type State
Unprotected - The device is not
Local
0
protected, and may be operated
normally via the user interface.
No operation possible – state of
Local
2*
outputs cannot be changed by any
Unprotected - The device accept
RF
0
and respond to all RF Commands.
No RF control – command class
Basic, Switch Multilevel and Color
RF
1
Switch are rejected, every other
command class will be handled
ROOT (Endpoint 1)
Event
[0x06/V3]
er proprietary failure
code [0x03]
Description
of the Inputs
Status
Parameter
0xFF – enable
(non-change-
able)
0xFF – enable
Device Over-
(non-change-
heat
able)
Hint
Inputs connected
with outputs.
Inputs discon-
nected from
outputs.
Outputs can be
controlled via
Z-Wave.
Outputs cannot
be controlled via
Z-Wave.
—
[0x01]
Advertisement
Table of Contents
