Table of Contents
Advertisement
24
confIguratIon
33.
This parameter determines to which alarm frames and how the
device should react. The parameters consist of 4 bytes, three most
significant bytes are set according to the official Z-Wave protocol
X – channels summarized: 1/2/3/4 channel are equal to values
1/2/4/8. Y – sequence number: 1-10 (parameter 157).
Parameter size 4B
Default value
Available
values
34.
This parameter determines to which alarm frames and how the
device should react. The parameters consist of 4 bytes, three most
significant bytes are set according to the official Z-Wave protocol
X – channels summarized: 1/2/3/4 channel are equal to values
1/2/4/8. Y – sequence number: 1-10 (parameter 157).
Parameter size 4B
Default value
Available
values
Alarm configuration - 4th slot
specification.
[0x02, 0xFF, 0x00, 0x00]
(CO Alarm, any notification, no action)
1B [MSB] – Notification Type
2B – Notification Status
3B – Event/State Parameters
4B [LSB] – action:
0x00 – no reaction, 0x0X – turn off selected chan-
nel, 0x1X – turn on selected channel, 0x2X – blink
selected channel, 0x3Y – activate alarm sequence
Alarm configuration - 5th slot
specification.
[0x04, 0xFF, 0x00, 0x00]
(Heat Alarm, any notification, no action)
1B [MSB] – Notification Type
2B – Notification Status
3B – Event/State Parameters
4B [LSB] – action:
0x00 – no reaction, 0x0X – turn off selected chan-
nel, 0x1X – turn on selected channel, 0x2X – blink
selected channel, 0x3Y – activate alarm sequence
Advertisement
Table of Contents
