Using The Sensortouch ® Wall Control - Seeley Breezair EXH Series Installation And Operating Instructions Manual

Evaporative air cooler
Table of Contents

Advertisement

STARTING YOUR COOLER
The _
buttonturnsthe air cooleron and
off.
Thereare two modesof operationto choose
from,Automaticmodeor Manualmode.When
the air cooler is turnedon, it will startin the
modeof operationitwas in when lastturned
off. If your air coolerhas beenoff for more
than (about)I0 minutes, w hen you start it,
"Preparingto Start" mayflashon the displayas
shown.This showsthat the water pumpwill
operateto saturatethe coolingpadsfor a few
minutes,beforethe fan is turnedon. This
ensuresthatwhenthe fan starts,only coolair
entersthe building.
In Manualmodethe coolinglevelcan be
manuallyadjusted.
In Manualmode,press _
to choose
betweencirculatingcoolair or uncooledair.
When"Cool"is displayed,freshcoolair will
circulateintothe building.When"Vent"is
displayedas shown,fresh uncooledair will
circulatethroughthe building.
Press _
to increasethe fan speedand
circulatemoreair. Press _
to decrease
the fan speedand circulatelessair. Press
onceto changethe speedby one increment.
Holdthe buttondownto changethe speed
morequickly.
MANUAL COOL DISPLAY
MANUAL VENT DISPLAY
ILLt122-A
AUTOMATIC
MODE
The _
button is used to select Automatic
mode
or Manual
mode.
When
"Auto"
is
displayed
the cooler
is under
Automatic
control
and will operate
according
to the temperature
sensed
at the wall control.
When
the air cooler
is turned
on, it will read the
temperature
and
set the cooler operation
accordingly.
If the temperature
increases
at the
wall control, then the fan speed will increase.
As the temperature
decreases
the fan speed
will decrease
until the cooler turns off.
Press _
or 1_
to overide
the automatic
cooling
level setting
and adjust your room
temperature.
AUTOMATIC
MODE DISPLAY
ILLl122-A
ILL1123-A
TIMED
AUTOMATIC
START
You can set the air cooler so that it will turn on
after a set number
of hours.
1. To set the delayed
start time, press
with the cooler turned
OFF. "Starting
in" will be
displayed
as shown with the last mode of
operation
(Manual
or Automatic).
2. If you want the air cooler to turn on in
Automatic
mode with the previous
settings,
then press _
until "Auto" is displayed.
Alternatively,
if you want the air cooler to turn
on in Manual
mode, press _
until "Man" is
displayed,
then press _
and then
or _
to set the required
fan speed.
3. To set the time until the start, press
4. Then press _
or _
to adjust the
time. The cooler can start up to 24 hours in
advance.
5. Press
_T_again
to initiate the timed
automatic
start. The timed start will not repeat.
ILL1124-A
MANUAL
MODE
To switch to
Manual
mode,
press
_
until
"Man"
appears
in the display,
button
until MAN
is shown on the display.
ILL1117-A

Advertisement

Table of Contents
loading

Table of Contents