Installation Checklist - Seeley Breezair EXH Series Installation And Operating Instructions Manual

Owners Name: [] Cooler l evel a ndsecure.
Telephone:
Address:
Dealer:
Installer:
DateInstalled:
Model N o.:
Serial N o.:
Motor Type:
MotorPower:
REMOTE CONTROL DIP
SWITCHES
Record the dip switch settings for this
cooler below (if applicable)
WARNING: Do not alter DIP
switches 1 to 8 on top row and 7
& 8 on bottom row as the cooler
will cease to work.
ON
t
OFF
ON
t
OFF
1 2345678
1 2345678
EXAMPLE ONLY ILL217-H
Definition of DIP switch positions (first 6
in bottom row only) are as follows:
(1) Reserved for later use.
(2) [] OFF, 24 hour clock.
[] ON, 12 hour clock.
(3) Not Used
(4) [] OFF, no pre-cool.
L_J ON, pre-cool.
(5) [] OFF, drains 3 days after power
off.
[] ON, drains 3 hours after power
off.
(6) [] OFF, drains every 65 minutes
of operation.
[] ON, activates water salinity
circuit (WaterManager).
[] All roof work properly sealed.
[] Ductwork and air distribution checked and outlets correctly set.
[] All wiring complete.
[] Control switch correctly installed.
[] Motorand pump correctly plugged into sockets.
[] Drain/overflow fitting correctly installed.
[] Water level and float adjustment checked.
[] Pump runs and water evenly distributed to all cooling pads.
[] All control functions checked.
[] Owner instructed on correct operating procedure and supplied with
operating instructions.
Signed by Installer: .........................................................
Dated: ........................................................................
SERVICE ENQUIRIES:
Contact your local Dealer or Installer
for assistance.