Download  Print this page

Rear Panel - Sony Trinitron PVM-20M4A Operating Instructions Manual

Color video monitor.
Hide thumbs

Advertisement

Table of Contents
Location and Function of Parts and Controls

Rear Panel

1
AC IN
1 AC IN socket
Connect the supplied AC power cord to this socket and
to a wall outlet.
2 LINE A, LINE B connectors
Two groups (A and B) of line input connectors for the
composite video and audio signals and their loop-
through output connectors.
To monitor the input signal through these connectors,
set the LINE/RGB selector to the LINE position (light
off) and press the A/RGB or B/COMPONENT selector
(light on).
VIDEO IN (BNC)
Connect to the video output of video equipment, such
as a VCR or a color video camera.
For a loop-through connection, connect to the video
output of another monitor.
VIDEO OUT (BNC)
Loop-through output of the VIDEO IN connector.
Connect to the video input of a VCR or another
monitor.
When the cable is connected to this connector, the
75-ohm termination of the input is automatically
released, and the signal input to the VIDEO IN
connector is output from this connector.
8
2
LINE A
LINE B
VIDEO
VIDEO
IN
OUT
IN
OUT
AUDIO
AUDIO
IN
OUT
IN
OUT
IN
OUT
IN
OUT
R/R–Y
G/Y
RGB/COMPONENT
5
3
4
LINE C
VIDEO
IN
OUT
REMOTE
AUDIO
IN
OUT
IN
OUT
IN
OUT
B/B–Y
AUDIO
(The
mark indicates automatic termination.)
AUDIO IN (phono jack)
Connect to the audio output of a VCR or to a
microphone via a suitable microphone amplifier.
For a loop-through connection, connect to the audio
output of another monitor.
AUDIO OUT (phono jack)
Loop-through output of the AUDIO IN connector.
Connect to the audio input of a VCR or another
monitor.
3 LINE C connectors
Y/C IN (4-pin mini-DIN)
Connect to the Y/C separate output of a video camera,
VCR or other video equipment.
For a loop-through connection, connect to the Y/C
separate output of a VCR or another monitor.
Y/C OUT (4-pin mini-DIN)
Loop-through output of the Y/C IN connector.
Connect to the Y/C separate input of a VCR or another
monitor.
When the cable is connected to this connector, the 75-
ohm termination of the input is automatically released,
and the signal input to the Y/C IN connector is output
from this connector.
IN
OUT
EXT SYNC
6

Advertisement

Chapters

Table of Contents

   Also See for Sony Trinitron PVM-20M4A

   Related Manuals for Sony Trinitron PVM-20M4A

Comments to this Manuals

Symbols: 0
Latest comments: