Axis DV426 Instruction Manual page 70

①Camera name of the alarm-triggered channel.
②Press this button to turn on/off curser.
③Line selecting: There are five lines to be selected, Line U(up), Line D(down), Line
L(left), Line R(right) and ALL. The button is green if selected. You can use remote
control to operate.
④There are four directions to adjust the shape of the cursor, Up,Down, Left and
Right.
If Line U(the green one) or Line D(the red one) is selected, the selected line can be
moved totally with these direction buttons.
If Line L or Line R is selected, the top point of the selected line can be moved to left or
right with Direction Up and Direction Down, and the bottom point of the selected line
can be moved to left or right with Direction Left and Direction Right.
⑤Lines of curser. The selected one will be thickened for three times. The two lines in
the middle will not be processed.
⑥Touch OK to save the settings and exit. Cancel to exit without saving any settings.
Priority: See the picture below.
70