10.1 LAN port and server setting
DHCP: Dynamic Host Configuration Protocol. To set it on stands for dynamic IPand
off, for static IP. Static IP must be manually input with IP address, mask and gateway.
MAC address can be automatically assigned or revised.
Enable LAN
step 1: Connect the LAN cable to the DVR.
step 2: Go to "Network - Cellular" page.
step 3: If DHCP is set to ON, a dynamic IP will be automatically matched. If DHCP is
set to Off, input the IP, mask, gateway and MAC manually.
step 4: Touch OK to exit.
step 5: Go to "Network - Server" page and touch the LAN icon.
51