Axis DV426 Instruction Manual page 55

Username &Password: Reversed.
OK: Save the settings and quit.
Cancel: Cancel the settings and quit.
Enable 2G/3G/4G

step 1: DVR can search 2G/3G/4G signal locally.
Step 2: Connect the 2G/3G/4G antenna at connector ⑤of DVR rear panel.
step 3: Open the DVR front housing and insert the 2G/3G/4G SIM card.
step 4: Go to Cellular setup interface and set Cellular to ON.
step 5: Input the APN and Access Number correctly. Access Number can be skipped.
Step 6: Touch "OK" to exit.
step 7: Input 2G/3G/4G Server IP and Port in "Network-Server Setup" page.
step 8: Cellular network status shows "Success" and server status shows "Online".
55