Tremolo; Auto Pan; Slicer - Roland Groovebox MC-707 Reference Manual

18 Tremolo

Cyclically changes the volume.
L in
Tremolo Tremolo
R in
Tremolo Tremolo
Parameter Value
TRI, SQR, SIN, SAW1,
SAW2, TRP
Mod Wave
SAW1
Rate OFF, ON
(sync sw)
Rate 0.05–10.00 [Hz]
(Hz)
Note
Rate
(note)
& "Note" (p. 120)
Depth 0–127
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127

19 Auto Pan

Cyclically modulates the stereo location of the sound.
L in
Auto Pan Auto Pan
R in
Auto Pan Auto Pan
Parameter Value
TRI, SQR, SIN, SAW1,
SAW2, TRP
Mod Wave
SAW1
R
L
Rate OFF, ON
(sync sw)
Rate 0.05–10.00 [Hz]
(Hz)
Note
Rate
(note)
& "Note" (p. 120)
Depth 0–127
Low Gain -15–+15 [dB]
High Gain -15–+15 [dB]
Level 0–127
L out
2-Band EQ 2-Band EQ
R out
2-Band EQ 2-Band EQ
Explanation
Modulation wave
TRI: Triangle wave
SQR:
Square wave
SIN:
Sine wave
SAW1/2: Sawtooth wave
TRP: Trapezoidal wave
SAW2
If this is ON, the rate synchronizes with the
tempo of the rhythm.
& "TEMPO" (p. 52)
Frequency of the change
Depth to which the effect is applied
Gain of the low range
Gain of the high range
Output Level
L out
2-Band EQ 2-Band EQ
R out
2-Band EQ 2-Band EQ
Explanation
How the pan changes
TRI: Triangle wave
SQR: Square wave
SIN:
Sine wave
SAW1/2: Sawtooth wave
TRP: Trapezoidal wave
SAW2
R
L
If this is ON, the rate synchronizes with the
tempo of the rhythm.
& "TEMPO" (p. 52)
Frequency of the change
Depth to which the effect is applied
Gain of the low range
Gain of the high range
Output Level

20 Slicer

By applying successive cuts to the sound, this effect turns a
conventional sound into a sound that appears to be played as a
backing phrase. This is especially effective when applied to sustain-
type sounds.
L in
Slicer Slicer
R in
Slicer Slicer
Parameter Value
Step 01–16 0–127
Rate OFF, ON
(sync sw)
Rate 0.05–10.00 [Hz]
(Hz)
Note
Rate
(note)
& "Note" (p. 120)
Attack 0–127
Input Sync Sw OFF, ON
Input Sync Threshold 0–127
Mode LEGATO, SLASH
Shuffle 0–127
Level 0–127
MFX/IFX Parameters
L out
R out
Explanation
Level at each step
If this is ON, the rate synchronizes with the
tempo of the rhythm.
& "TEMPO" (p. 52)
Rate at which the 16-step sequence will cycle
Speed at which the level changes between
steps
Specifies whether an input note will cause
the sequence to resume from the first step of
the sequence (ON) or not (OFF)
Volume at which an input note will be
detected
Sets the manner in which the volume
changes as one step progresses to the next.
LEGATO:
The change in volume from one
step's level to the next remains unaltered. If
the level of a following step is the same as
the one preceding it, there is no change in
volume.
SLASH: The level is momentarily set to 0
before progressing to the level of the next
step.
This change in volume occurs even if the
level of the following step is the same as the
preceding step.
Timing of volume changes in levels for even-
numbered steps (step 2, step 4, step 6...).
The higher the value, the later the beat
progresses.
Output Level
91