Mercedes-Benz S-Class Owner's Manual page 503

Release retaining clips 1.
#
Pull cover 2 up.
Remove any existing moisture from the fuse
#
box using a dry cloth.
Loosen screws 4, and remove fuse box lid
#
3 from the top.
Closing
Check whether the seal is positioned cor‐
#
rectly in lid 3.
Breakdown assistance 501
Insert lid 3 into the bracket at the rear of
#
the fuse box.
Fold down lid 3 of the fuse box and tighten
#
screws 4.
Insert cover 2 on both sides and engage
#
retaining clips 1.
Close the bonnet.
#
Opening and closing the fuse box in the
cockpit
Requirements:
Observe the notes on electrical fuses
R
( page 499).
→