Mercedes-Benz S-Class Owner's Manual page 189

Setting the stationary heater/stationary ven‐
tilation via remote control
Requirements:
The fuel tank is filled to at least reserve fuel
R
level.
Switching on immediately
Press and hold the u button.
#
Setting the departure time
Briefly press the u button.
#
Press the , or . button repeatedly
#
until the time to be changed appears on the
display.
Press the u and ^ buttons simultane‐
#
ously.
The Î symbol on the remote control display
flashes.
Press the , and . buttons to set the
#
desired departure time.
Press the u and ^ buttons simultane‐
#
ously.
The new departure time will be stored.
Up to three departure times can be stored.
To activate the departure time: select the
#
desired departure time and press and hold
the u button.
The Í symbol, the departure time and,
depending on the selected departure time,
the letter A, B or C appear on the display.
Climate control 187
To deactivate the departure time: select
#
the desired departure time and press and
hold the ^ button.
OFF will appear on the display.
To check the status of the stationary
#
heater: briefly press the u button.
Switching off immediately
Press and hold the ^ button.
#
Overview of the remote control displays (sta‐
tionary heater/stationary ventilation)
1
Stationary ventilation switched on
2 Stationary heater switched on