INSTALLATION
2
2.7 General requirements
INFORMATION!
The following precautions must be taken to ensure reliable installation.
Make sure that there is adequate space to the sides.
•
•
Protect the signal converter from direct sunlight and install a sun shade if necessary.
•
Signal converters installed in control cabinets require adequate cooling, e.g. by fan or heat
exchanger.
Do not expose the signal converter to intense vibration. The flowmeters are tested for a
•
vibration level in accordance with IEC 60068-2-64.
2.7.1 Vibration
Figure 2-6: Avoid vibrations
2.7.2 Magnetic field
Figure 2-7: Avoid magnetic fields
8
www.krohne.com
OPTIFLUX 6000
02/2019 - 4002945704 - QS OPTIFLUX 6000 R08 en