Installation Of Weld-On Versions - KROHNE OPTIFLUX 6000 Quick Start Manual
Electromagnetic flow sensor for hygienic and sanitary applications
Hide thumbs
Also See for OPTIFLUX 6000:
- Handbook (48 pages) ,
- Quick start manual (36 pages) ,
- Supplementary instructions manual (40 pages)
Table of Contents
Advertisement
INSTALLATION
2
2.9.2 Installation of weld-on versions
For mounting sensors with weld-on connections, please follow the procedure as follows:
• Mount the sensor completely in the pipeline and spot the weld-on connections to the pipe. This
is necessary to align the mounting bores of the flange.
• Remove the sensor body and the gaskets from the adapters by loosen the screws.
• Weld the adapters completely to the pipe.
• When the pipe is cold again, reinstall the gasket and mount the sensor.
16
www.krohne.com
OPTIFLUX 6000
02/2019 - 4002945704 - QS OPTIFLUX 6000 R08 en
Advertisement
Table of Contents
