KROHNE OPTIFLUX 6000 Quick Start Manual

Quick Start
© KROHNE 03/2006 7.30954.31.00
JS
General
For in-depth information please consult
the handbook, data sheet, special
manuals and certificates supplied on
CD-ROM.
Installation, assembly, commissioning and
servicing must only be undertaken by
trained personnel. Maintenance which is
considered relevant to safety in the sense
of explosion protection must only be
carried out by the manufacturer, his
agents or under the supervision of
experts.
For use in hazardous areas, special
codes and regulations are applicable,
which are supplied in a separate
document that describes all hazardous
area relevant information.
Responsibility as to suitability and
intended use of this device rests solely
with the user. The supplier does not
accept any liability resulting from misuse
by the customer. Improper installation and
operation may lead to loss of warranty. In
addition, the "General conditions of sale",
found on the back of the invoice and
forming the basis of the purchasing
contract, are applicable.
If you need to return the device to the
manufacturer or supplier, please complete
the form given on the CD-ROM and attach
it to the device. KROHNE regrets that it
cannot repair or check your device unless
accompanied by this completed form.
OPTIFLUX
6000
Electromagnetic
Hygienic Flow Sensor
Flanged and adapter versions
for volumetric flowrate measurement
of electrically conductive liquids
Items supplied
Only separate version
Visual check
Liner materials
PFA Teflon-PFA
Example
Electrode materials
HC4 Hastelloy C4
V4A Stainless steel
Ti Titanium