General / Safety Information - Wolf CRL Series Installation And Maintenance Instructions Manual

General information
Reference symbols
Safety information
3064361_201811

1 General / Safety information

These installation and maintenance instructions only apply to WOLF CRL / CRL
evo max ventilation units. Authorised personnel should read these instructions
before any commissioning or maintenance work. Comply with the specifications
in this document. Installation, commissioning and maintenance work must only
be carried out by trained personnel.
These instructions should be considered an integral part of the unit
supplied, and should always be easily accessible.
Failure to observe these installation and maintenance instructions voids any
WOLF GmbH warranty.
The following reference symbols are used in these instructions. This
important information concerns personal and operational safety as well
as operational reliability.
"Safety information" identifies instructions that must be observed to
the letter, to prevent risks and injuries to individuals and damage to the
appliance.
Danger through 'live' electrical components.
Please note: Turn off the ON/OFF switch before removing the casing.
Never touch electrical components or contacts when the ON/OFF switch
is in the ON position. There is a danger of electrocution, resulting in a
risk to health or death.
The main terminals are 'live', even when the ON/OFF switch is in the OFF
position.
"Please note" designates technical instructions which you must observe
Note
to prevent the unit malfunctioning or being damaged.
In addition to installation and maintenance instructions, there are notes attached
to the unit in the form of labels. These must also be observed.
Only qualified and trained personnel may be appointed for the installation,
commissioning, maintenance and operation of the unit.
Only qualified electricians are permitted to work on the electrical system.
VDE regulations [or local regulations] and those of your local power supply
utility are applicable to electrical installation work.
Only operate the unit within its output range, which is stated in the technical
documentation supplied by WOLF.
Only operate the appliance if it is in perfect technical condition. Any faults or
damage that impact or might impact upon the safety or correct function of the
unit must be remedied immediately by qualified personnel.
Only replace faulty components and equipment with original WOLF spare parts.
It may only be used for handling air. This air must not contain any harmful,
Note
combustible, explosive, aggressive, corrosive or otherwise dangerous
substances, as these would be distributed throughout the duct system
or building, where they could cause a risk to the health of, or even kill
the occupants, animals or plants living there.
3