Delivery / Handling - Wolf CRL Series Installation And Maintenance Instructions Manual

Comfort ventilation unit with thermal wheel heat exchanger
Table of Contents

Advertisement

Delivered condition
Delivery
Storage
General handling information
22

11 Delivery / Handling

CRL / CRL evo max ventilation units are supplied in packaging that protects them
from dirt and damage. Upon receipt of the goods, check the unit for possible
transport damage. If there is any damage or even a suspicion of damage, the
recipient must indicate this on the consignment note and have it countersigned
by the haulier. The recipient of the goods must notify WOLF of the relevant
facts without delay.
Dispose of the transport packaging in accordance with local regulations.
Only store the ventilation unit in dry rooms at an ambient temperature between
-25 °C and +55 °C. If it is stored for a long time, ensure that all apertures are
sealed against air and water ingress.
Units are supplied fully assembled and fully wired.
Only transport units in their installation position.
Never tilt the unit when transporting it through doorways or in narrow stairwells
(lifts).
Failure to observe these instructions can damage internal components
irreparably.
3064361_201811

Advertisement

Table of Contents
loading

Table of Contents