Wolf CRL Series Installation And Maintenance Instructions Manual page 23

Transport external units
Transport Internal units
3064361_201811
11 Delivery/Handling
Transport ropes with a minimum length equivalent to the eye bolt distance L
must be used when transporting external CRL units with eye bolts. The same
applies to the individual transport units of the CRL evo max units.
External CRL evo max units may only be lifted as an entire unit with a lifting
beam when pulling equally and vertically on all available eye bolts.
max. 60°
L
The 3500, 4800, 6200 and 9000 versions of the CRL internal units can be split
into three sections for easier handling. (Delivered as a transport unit)
CRL evo max internal units are delivered in 3 transport units as standard. The
procedure for connecting the units together is described in Item 13.
Unit connectors, hexagon bolts and nuts are used to connect the parts together.
Electric lines and control cables can be disconnected and connected again quite
simply by means of plug-in connections in the control unit casing.
Unit connector
Lifting beam
90°
Control unit cover
90°
23