Standards, Regulations / Disposal - Wolf CRL Series Installation And Maintenance Instructions Manual

Standards and regulations
Disposal and recycling
3064361_201811

2 Standards, regulations / disposal

- Machinery Directive 2006/42/EC
- Low Voltage Directive 2014/35/EU
- EMC Directive 2014/30/EU
- ErP Directive 2009/125/EC
- EN ISO 12100
- DIN EN ISO 13857:
- DIN EN 349
- DIN EN 953
- DIN EN 1886
- DIN ISO 1940-1
- VDMA 24167
- DIN EN 60204-1
- DIN EN 60730
- DIN EN 61000 -6-2+3
In addition, ÖVE regulations and the local building code apply to Austria.
The following standards and regulations apply to installation and operation:
- DIN EN 50106 (VDE 0700-500) Safety of electrical appliances; tests
- DIN VDE 0100
- DIN EN 50110-1 (VDE 0105-1) Operation of electrical installations
- DIN VDE 0105-100
When the unit reaches the end of its service life, it must only be dismantled by
qualified personnel. Before starting to dismantle the unit, disconnect the power
supply. Power cables must be removed by qualified electricians. Sort and dispose
of metal and plastic parts according to material types and in compliance with
local regulations. Dispose of electrical and electronic components as electrical
waste.
Safety of machinery; general principles
for design
Safety of machinery; safety distances
Safety of machinery; minimum
clearances
Safety of machinery; Guards
Ventilation for buildings; central air-
handling units
Mechanical vibration; balance quality
requirements
Fans; safety requirements
Safety of machinery - Electrical
equipment of machines
Automatic electrical controls
Electromagnetic Compatibility
Regulations regarding the installation of
high voltage systems up to 1000 V
Operation of electrical systems; general
stipulations
5