Table of Contents
Advertisement
Jump to Flat Rate Times
REMOVAL
1. Loosen RH lug nuts with 11/16" shallow
socket.
2. Lift trike with jack and support with jack stands
or center stand.
3. Remove RH lug nuts and remove RH wheel.
4. Remove operator and passenger seats.
5. See Fig. 1. Disconnect main (6-pin) wiring har-
ness connector.
6. See Fig. 2. Remove existing wiring harness
from body mount clips and disconnect from
taillights, turn signals and license plate connec-
tor.
REPLACEMENT
1. See Fig. 3. Connect new harness to body
mount clips and connect harness to taillights,
turn signals and license plate connector.
2. Re-connect main (6-pin) wiring harness con-
nector.
3. Test turn signal operation.
4. Install operator and passenger seats.
5. Install RH wheel.
6. Torque lug nuts to 75 ft. lbs.
Jump to Parts and Pricing
R & R WIRING HARNESS
41
Fig. 1
Disconnect main (6-pin) wiring harness
Fig. 2
Body mount clips
Fig. 3
Connect taillights and license plate wiring
Hide quick links:
Advertisement
Table of Contents
