Jump to Flat Rate Times
R & R PASSENGER FOOTPADS
REMOVAL
1. See Fig. 1. Remove RH side cover.
2. See Fig. 2. Remove LH side cover with igni-
tion key and remove tool box cover.
3. See Fig. 3. Remove lock nuts and washers
from all (6) footpad studs (3 per side).
4. Remove footpads by lifting outside edge and
rear of footpad and turn toward inside of trike.
Lift remainder of footpad and stud out of body
pocket.
REPLACEMENT
NOTE: Do not over-tighten hardware.
1. Install new footpads and secure with original
hardware.
2. Reinstall side covers.
Jump to Parts and Pricing
25
Fig. 1
Remove right side cover
Fig. 2
Remove left side cover
Fig. 3
Remove hardware