lehman Trikes TRAMP 2009 Service Information page 33

Jump to Flat Rate Times
R & R SWINGARM CONTINUED
12. See Fig. 6. Support differential under rear of
motorcycle with jack stands.
13. See Fig. 7. The pinion shaft is located to left of
the motorcycle centerline and vent tube points
up.
14. Use original mounting hardware to attach dif-
ferential to swingarm face.
CAUTION: Driveshaft interference with
swingarm housing may cause equipment
damage or lead to an accident. Verify
proper clearance and adjust as needed.
15. Make sure differential is in the highest possible
position relative to swingarm.
16. Center differential to motorcycle frame.
17. Torque differential mounting bolts to 47 ft.-lbs.
Jump to Parts and Pricing
33
Fig. 6
Support differential with jack stands
Fig. 7
Pinion shaft Vent tube