lehman Trikes TRAMP 2009 Service Information page 31

Jump to Flat Rate Times
REMOVAL
1. Remove rear wheels (See R&R Rear Wheel).
2. Remove operator and passenger seats located
behind battery box.
3. Disconnect main wire harness.
4. Remove body (See R&R Body).
5. Remove differential (See R & R Differential).
6. Remove driveshaft from swingarm.
7. See Fig. 2. Remove electrical box and let it
hang on trike.
8. See Fig. 3. Remove cushion rod-to-swingarm
bolt (save and reuse bushing in this location).
9. Remove RH swingarm nut and pin.
10. Remove LH swingarm pin.
11. Remove swingarm by tilting drive side up and
remove from trike.
12. Remove shock link sleeve from swingarm.
Jump to Parts and Pricing
R & R SWINGARM
31
Fig. 1
Leave front bolts to support body
Fig. 2
Remove electrical box
Fig. 3
Cushion rod to swingarm bolt
Shock link bolt