Jump to Flat Rate Times
REMOVAL
1. See Fig. 1. Disconnect tail light wiring from
main harness.
2. See Fig. 2. Remove self-tapping nuts from
back of light housing and remove light and gas-
ket from body.
REPLACEMENT
1. Install new light housing and gasket to body.
2. Reinstall nut to threads of housing.
3. Connect tail light wiring to main harness.
4. Test lights.
Jump to Parts and Pricing
R & R TAIL LIGHT
35
Fig. 1
Disconnect tail light wiring from harness
Fig. 2
Remove self-tapping nuts