Table of Contents
Advertisement
Jump to Flat Rate Times
R & R PINION SEAL CONTINUED
REMOVAL CONTINUED
20. Using original hardware, attach differential to
swingarm.
21. Torque differential mounting bolts to 47 ft.-lbs.
22. See Fig. 6. Install (2) u-bolts, (4) lock washers
and (4) nuts to install yoke to pinion shaft.
23. Tighten bolts using 1/2" wrench. Be sure to
tighten both sides equally from both side to
side and top to bottom.
24. Torque u-bolts to 20 ft-lbs.
CAUTION: Do not over-tighten u-bolts. The
bearing cups may distort, causing prema-
ture joint failure or u-bolts may break.
25. Check differential fluid and add appropriate
amount of 80w90 fluid if necessary. Differen-
tial fluid capacity for the Tramp is 30 oz.
26. Install new wheels on wheel studs.
27. Install lug nuts and tighten in a criss-cross
pattern.
28. Torque lug nuts to 75 ft. lbs.
Jump to Parts and Pricing
29
Fig. 6
Install u-bolts
Hide quick links:
Advertisement
Table of Contents
