Operational Indications - Siemens SICAM MMU 7KG9663 Device Manual

14

Operational Indications

Indication
Device OK
Battery Failure
Settings Load
Settings Check
Settings Activate
Modbus TCP OK
(Modbus TCP Server)
Ethernet Link Error
SICAM MMU 7KG9663, Device Manual
E50417-H1040-C514-A3, Edition 01.2016
Description
Indications that can be assigned to the binary outputs or LEDs
The device startup was successful.
Battery voltage < 2.7 V or no
battery inserted
Starting to change the parameters
of the passive set of parameters.
The passive set of parameters is to
be activated; the internal parame-
ter check is running.
The passive set of parameters is
enabled and the device works with
these parameters.
At least one Modbus TCP link has
received Modbus messages.
Ethernet connection error
Notes
Indication on: Device ready
Indication on: Battery failure
Indication on: Start of changes
Indication off: Changes complete
Indication on: Check started
Indication off: Check complete
Indication on: Activation started
Indication off: Activation complete
Indication on: At least one Modbus message was re-
ceived during the set monitoring time. The time stamp is
set when the first valid message is received.
Indication off: No Modbus message was received during
the set monitoring time.
See chapter 7.3.4.2.2
Indication on: Error
Indication off: Ethernet link recognized
239