Changing Unit Measures - Nautilus Schwinn IC3 Service Manual

Condition/Problem
Unit rocks/does not sit
level
to pedal
Clicking sound when
pedaling
Seat post movement
Resistance is uneven
when pedaling
The default distance unit is kilometers (K). You can switch units between kilometers and miles before you start a workout,
or after you reset the Console. To change the units, push UP and DOWN together and hold 3 seconds. When the display
begins to blink, use the arrow button to change the units (K or M). Press any key to save.
Check level adjustment
Check surface under unit
Check pedal to crank
connection
Check crank arm to axle
connection
Check drive belt tension
Check pedal to crank
connection
Check locking pin
Check locking knob
Brake assembly
Levelers may be turned to level machine.
Adjustment may not be able to compensate for extremely un-
even surfaces. Move machine to level area.
Pedal should be tightened securely to crank arm. Be sure con-
nection is not cross-threaded.
Crank arm should be tightened securely to axle.
Refer to the "Adjust the Belt Tension" procedure in the Service
Manual.
Remove pedals. Make sure there is no debris on threads, and
reinstall the pedals.
Be sure adjustment pin is locked into one of the seat post
adjustment holes.
Be sure knob is securely tightened.
Refer to the "Lubricate the Brake" procedure in the Service
Manual.
7
Solution