Health And Safety - Ultimaker S5 Pro Bundle Installation And User Manual

1.4 Health and safety

3D printing thermoplastics may result in the release of Ultra Fine Particles (UFPs) and Volatile Organic
Compounds (VOCs) depending on the thermoplastic used and settings of the 3D printer.
The Ultimaker products are designed for use with Ultimaker materials and are open for use with materials from
third-party suppliers.
Ultimaker materials
Ultimaker materials can be printed safely without any filtering using the recommended temperatures and settings
in a well-ventilated area (minimum refresh rate of 1.8 for a room size of 30.6 m
printers are operated in a contained environment, emissions of UFPs and/or VOCs may vary. Please consider other
safety measures, such as a filter, cabinet and/or dedicated ventilation system depending on your specific situation.
Third-party materials
Third-party material manufacturers can supply print profiles that contribute to reliable results with Ultimaker
hardware ("The Ultimaker Material Alliance Program").
The use of print profiles and materials from Ultimaker's Material Alliances and/or other suppliers may require
additional safety measures, such as a filter, for the safe usage of such materials. Please take the relevant
information provided by the supplier of such filament/material into account at all times for safe operation. Please
check the safety data sheet of each specific material for more information.
Ultimaker cannot be held responsible for any adverse effects from the use and/or performance of these materials.
Ultimaker S5 Pro Bundle user manual
). When multiple Ultimaker 3D
2
7