Wave - Interacoustics EyeSeeCam Instructions For Use Manual

If you wish to reset the marked saccade back to the default values click on reset and the values will return
to the original state.
Figure 5.1.3-7 Reset Saccades back to default values
3D wave
If you would like to see the data expressed using a 3D waveform then from the Report menu choose the
3D wave option.
Figure 5.1.4-1 Report menu item to select 3D waveform
In this view you will see the saccades colored in orange.
Figure 5.1.4-2 3D waveform view of impulse data
EyeSeeCam vHIT - Instructions for Use - EN Page 43