Reports; Report Menu Options; Select And Edit Traces - Interacoustics EyeSeeCam Instructions For Use Manual

5 Reports

Report Menu Options

After you have completed a test a report will automatically be generated. You have several options
available in the Report menu to help you edit and customize your reports.
Figure 5.1-1 Report menu options

Select and Edit Traces

After you have finished your tests, in the Report menu you can Select traces to edit.
Figure 5.1.1-1 Report menu to Select traces
Once you opt to select traces, a new edit window will pop up called Head Impulse Editor. In this menu
you can select individual or multiple data points to delete. If you click on an individual trace it will be
bolded so you know it's active. If you hold down the control key you can click on multiple waveforms. After
you have selected the waveforms that you want to delete, simply hit the delete key on the keyboard and
these tracings will be removed from the analysis.
EyeSeeCam vHIT - Instructions for Use - EN Page 37