Belling 900Ei User Manual page 19

Child Lock
This feature is to help prevent accidental
switching on of the hob, especially by
young children.
To activate:
Press the key lock button and pause
button together, and then release them.
Complete activation by pressing the key
lock button again.
To deactivate:
Press the key lock button and pause
button together, and then release them.
Complete activation by pressing the pause
button again.
Residual Heat indicators
If when the cook zone is switched off the
glass surface is above 60°C , H will be dis-
played in the cook zone display until the
glass surface drops below approximately
55°C.
This feature not only warns you against
hot surfaces but also indicates that there
is residual heat which can be used as
temporary warm zone.
Note - The cook zone itself does not heat
up, but the ceramic glass does get hot
because of the hot pan conducting heat
back onto the hob glass.
Overheat Pan Protection
The hob is equipped with additional safety
systems that help to prevent cookware
from overheating, providing an additional
level of safety not available on conven-
tional hobs (such as gas and ceramic
hobs).
USING THE HOB USING THE HOB
Approximate
Temperature
Note - The safety temperature control
of the pans is only possible with quality
flat bottomed pans suitable for induction
cooking. Poor quality pans can create
air gaps between the glass and the pan,
which affects the accuracy of the tem-
perature control.
Auto Stand by (Holiday Shut Down)
The hob will automatically switch itself off
if left unattended.
Cooking guide
For best cooking results, follow the
examples in the guide below, bearing in
mind that settings 8 and 9 are maximum
positions and should only be used for
deep frying and bringing up to the boil
quickly.
Glass
Intelligent hob
Surface
safety system
( C)
o
Reduces Power Boost
200
setting to Power Level 9
Reduces power to 60%
250
of power level setting
270 Switches cook zone off
Switches whole appli-
300
ance off