Dialing Modes; Reach Remote Control - Allworx Verge 9304 User Manual

®
Allworx Verge™ IP Phone Series User Guide
Programmable Button Labels
Press to configure
<Hands-Free device
name>
Connect (single hands-free
device paired)
Press to connect (multiple
hands-free devices paired)
Paired
Connecting
Connected
4.8

Dialing Modes

Select how the Verge IP phone places a call using desk phone mode (default) or Cell Phone mode. To
set up the dialing mode, see
• Desk Phone Mode - users dial a number and the Verge IP phone automatically places the call. If
users enter a wrong number, hang up and start over.
• Cell Phone Dialing mode - users can edit a number before placing the call, and requires users to
press the send (
4.9

Reach Remote Control

Control the Verge IP phone on a Reach device. If an Allworx user has both a Reach device and a Verge
IP phone, the device and the phone automatically link together, and then the Allworx User can use the
Reach application to control the Verge IP phone using a robust user interface, especially if using a
tablet. In this way, the Reach Remote Control enables a desk phone to serve as an executive phone. The
Reach Remote Control feature enables users to answer calls on all appearance types.
The audio still comes to/through the Verge IP phone (headset recommended). The Verge IP phone
Note:
continues to respond to phone button presses.
The Verge 9304 IP phone does not support the Reach Remote Control feature.
Note:
For more information about using Reach Remote Control, see the Reach User Guide Version 3.0 or
higher.
Page 68
Opens the Bluetooth settings screen for the user to pair and connect a Bluetooth device to
the Verge 9312 IP phone.
A paired or connected hands-free device to the Verge 9312 IP phone.
The Bluetooth Hands-Free programmable button is not available for use with a mobile device
because a headset is already connected. Indicates a paired and connected Bluetooth enabled
headset. Pressing this programmable button opens the Bluetooth Settings screen to assign a
mobile device to the programmable button. This button does not activate the headset for a
call - use the Headset function button instead.
user had decided to disconnect from the Verge 9312 IP phone or the mobile device, and now
must press the Bluetooth Hands-Free programmable button to reconnect the hands-free
device.
The Verge 9312 IP phone knows of the Bluetooth enabled devices. Requires the user to select
and connect to the hands-free device.
The Verge 9312 IP phone is looking for the paired hands-free device.
User has selected a hands-free device to use OR the Allworx system automatically found and
connected to the preferred hands-free device.
"Cell Phone Dialing" on page
) soft key to place the call.
90.
866.ALLWORX * +1 585 421 3850
Version: T Revised: February 14, 2019
www.allworx.com