Vx Solo Op (Ecl 210/A237.1A) - 1 He Circuit + Sec. Connection For Dhw Cylinder - Danfoss VX Solo II Instructions Manual

Instructions
6.9 VX Solo OP (ECL 210/A237)
1 Plate heat exchanger
25 Electronic controller
29 Actuator AMV 10
30 Flow controller with integrated control valve AVQM
Please note:
Your substation may look different than the substation shown, as
variants with other components may be supplied. The control func-
tion, however, is basically as stated in this instruction manual.
Instructions for the fitted components will be supplied together with
the substation.
Above photo shows VX Solo OP variant for heating only.
Measurements:
Dimensions without cover
H640 x W440 x D250 mm
Dimensions with cover
H640 x W500 x D380 mm
Connections:
Order:
1 District heating (DH) supply
2 District heating (DH) return
3 Cylinder supply
4 Heating (HE) supply
5 Cylinder return
6 Heating (HE) return
Connection sizes (example:
DH: G¾ (ET)
HE + Cylinder: G¾ (IT)
20 DKDHR
VX Solo II
1
Primary
top view
VI.GP.P1.02
25
29
30
Secundary
Wall
Danfoss District Energy